内核打印的限速函数 net_ratelimit()

2009-12-20 13:16| 发布者: admin| 查看: 59| 评论: 0|原作者: 琴姬

1) net_ratelimit()用于保护内核网络调试信息的打印, 当它返回(TRUE)时则可以打印调试信息,
返回零则禁止信息打印. 它的特性为当"极快地"调用net_ratelimit()时,它最多只允许连续打印
前10条信息, 后继信息每隔5秒允许打印一次.这样可防止攻击者使内核不断产生调试信息来使系
统过载的拒绝服务攻击.
2) net_ratelimit()定义了一个时间计数器变量(toks), 它随着系统时钟计数线性增长,
但不超时50秒时钟计数(net_msg_burst). 当计时器的值大于或等于5秒时钟计数(net_msg_cost)时,
则允许打印信息. 每允许打印一条信息, 计时器就减去5秒计数, 当计时器的值小于5秒时, 就
不允许打印信息了.
; net/core/utils.c:
int net_msg_cost = 5*HZ; /*在拥塞时, 每条网络消息记录所间隔的时间*/
int net_msg_burst = 10*5*HZ; /*连续记录网络突发消息的间隔(最多连续记录10条消息)*/
/*
* This enforces a rate limit: not more than one kernel message
* every 5secs to make a denial-of-service attack impossible.
*
* All warning printk()s should be guarded by this function.
*/
int net_ratelimit(void)
{
static spinlock_t ratelimit_lock = SPIN_LOCK_UNLOCKED;
static unsigned long toks = 10*5*HZ; /*50秒量程的计时器,每打印一条消息,计时器减5秒时间*/
static unsigned long last_msg; /*上一次调用net_ratelimit()的时戳*/
static int missed; /*两次net_ratelimit()调用之间所丢弃的信息数量*/
unsigned long flags;
unsigned long now = jiffies; /*取当前时戳*/
spin_lock_irqsave(&ratelimit_lock, flags);
toks = now - last_msg;
/*计时器加上两次net_ratelimit()调用的时间差,表现为计时时间的线性增长*/
last_msg = now;
if (toks > net_msg_burst) /*计时器累积时间超时50秒时*/
toks = net_msg_burst;/* 设置计时上限*/
if (toks >= net_msg_cost) { /*当计时大于或等于5秒时可以打印信息*/
int lost = missed;
missed = 0;
toks -= net_msg_cost; /*减去5秒时间*/
spin_unlock_irqrestore(&ratelimit_lock, flags);
if (lost)
printk(KERN_WARNING "NET: %d messages suppressed.\n", lost);
return 1;
}
missed ;
spin_unlock_irqrestore(&ratelimit_lock, flags);
return 0;
}
/*linux 2.6内核直接调用__printk_ratelimit()*/
int net_ratelimit(void)
{
return __printk_ratelimit(net_msg_cost, net_msg_burst);
}
kernel/printk.c
/*
* printk rate limiting, lifted from the networking subsystem.
*
* This enforces a rate limit: not more than one kernel message
* every printk_ratelimit_jiffies to make a denial-of-service
* attack impossible.
*/
int __printk_ratelimit(int ratelimit_jiffies, int ratelimit_burst)
{
static DEFINE_SPINLOCK(ratelimit_lock);
static unsigned long toks = 10 * 5 * HZ;
static unsigned long last_msg;
static int missed;
unsigned long flags;
unsigned long now = jiffies;
spin_lock_irqsave(&ratelimit_lock, flags);
toks = now - last_msg;
last_msg = now;
if (toks > (ratelimit_burst * ratelimit_jiffies))
toks = ratelimit_burst * ratelimit_jiffies;
if (toks >= ratelimit_jiffies) {
int lost = missed;
missed = 0;
toks -= ratelimit_jiffies;
spin_unlock_irqrestore(&ratelimit_lock, flags);
if (lost)
printk(KERN_WARNING "printk: %d messages suppressed.\n", lost);
return 1;
}
missed ;
spin_unlock_irqrestore(&ratelimit_lock, flags);
return 0;
}

收藏分享邀请

		自动登录	找回密码
密码			注册

内核打印的限速函数 net_ratelimit()

最新评论

相关分类