|
|
:rolleyes: 我用Nero StartSmart刻录VCD光盘，老是提示错误，请高手指点一二！！！
提示错误如下：
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\光碟工具\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 2003-6-17 :15:25
Nero版本： 6.0.0.15 (Nero Express)
刻录机： <HP CD-Writer+ 7100> 版本: 1.00 - HA 1 TA 0 - 6.0.0.15
适配卡驱动程序： <atapi> HA 1
Drive buffer : 768kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP CD-Writer+ 7100 >版本: 1.00 - HA 1 TA 0 - 6.0.0.15
适配卡驱动程序： <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTLA-305040 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HP CD-Writer+ 7100 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HP CD-Writer+ 7100 H: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 68MB (70052kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.9.2003
视频光盘
:21:02 #1 Text 0 File Isodoc.cpp, Line 5878
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : Multibyte
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
:21:02 #2 Text 0 File VCDDoc.cpp, Line 2577
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------
:21:02 #3 Text 0 File Reader.cpp, Line 118
Reader running
:21:02 #4 Text 0 File Writer.cpp, Line 127
Writer HP CD-Writer+ 7100 running
:21:02 #5 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)
:21:02 #6 ISO9660GEN -11 File geniso.cpp, Line 3861
First writeable address = 0 (0x00000000)
:21:02 #7 Text 0 File Burncd.cpp, Line 3169
Turn on 光盘一次刻录, using CD-R/RW media
:21:02 #8 Text 0 File DlgWaitCD.cpp, Line 230
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 144885 (32:13.60)
:21:02 #9 Text 0 File DlgWaitCD.cpp, Line 235
Write in overburning mode: FALSE
:21:02 #10 Text 0 File DlgWaitCD.cpp, Line 1878
Recorder: HP CD-Writer+ 7100;
CDR code: 00 97 15 15; OSJ entry from: Ritek Co.
ATIP Data: ?
:21:02 #11 Text 0 File DlgWaitCD.cpp, Line 393
>>> Protocol of DlgWaitCD activities: <<<
=========================================
:21:02 #12 Text 0 File ThreadedTransferInterface.cpp, Line 769
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1294 (1294) = #1294/0:17.19
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_ULTRARAW_MODE2, 2368, config 0x4, wanted index0 0 blocks, length 1294 blocks [HP CD-Writer+ 7100 ]
1: TRM_DATA_MODE2_2336 (日本明星写真集1)
2 indices, index0 (150) not provided
original disc pos #0 + 143442 (143442) = #143442/31:52.42
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_ULTRARAW_MODE2, 2368, config 0x4, wanted index0 0 blocks, length 143442 blocks [HP CD-Writer+ 7100 ]
--------------------------------------------------------------
:21:02 #13 Text 0 File ThreadedTransferInterface.cpp, Line 938
Prepare recorder [HP CD-Writer+ 7100 ] for write in raw writing
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_ULTRARAW_MODE2, 2368/0x04, FilePos 0 355200 3419392, ISRC ""
2: TRM_DATA_ULTRARAW_MODE2, 2368/0x04, FilePos 3419392 3774592 343445248, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1294 | 2 | 0 | 0x00 | 0x41
1444 | 2 | 1 | 0x00 | 0x41
144886 | lead-out | 1 | 0x00 | 0x41
:21:02 #14 Phase 73 File dlgbrnst.cpp, Line 1843
准备项目
:21:02 #15 Phase 24 File dlgbrnst.cpp, Line 1843
文件暂存过程开始
:21:02 #16 Phase 25 File dlgbrnst.cpp, Line 1843
文件暂存过程完成
:21:02 #17 Phase 36 File dlgbrnst.cpp, Line 1843
以2x (300 KB/s)的速度开始刻录
:21:02 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
:21:02 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2136
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1444
:21:02 #20 Text 0 File Mmc.cpp, Line 14512
StartDAO : CD-Text - Off
:21:03 #21 SCSI -1015 File Cdrdrv.cpp, Line 1411
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04430000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0xFF 0xFF 0xCF 0x22 0x00 0x00 0x1B 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x00 0x00 0x00 0x19
0x00 0x06 0xED 0x6F 0x73 0x02
:21:03 #22 CDR -1015 File Writer.cpp, Line 335
光盘校准区已满
:21:03 #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
:21:03 #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
:21:03 #25 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
:21:03 #26 Phase 38 File dlgbrnst.cpp, Line 1843
以2x (300 KB/s)的速度刻录失败
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2003-9-10 :00:00
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 2002-8-29 :16:27 (Adapter driver for rec)
Registry Keys: |
|
IP卡
狗仔卡
发表于 2009-1-9 15:50:59
收藏
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
发表于 2010-2-10 01:05:07